Print Farm Hub Setup
Print Farm Hubs come pre-loaded with AutoFarm3D.
Begin with Hub turned off and unplugged. Make sure SD card is fully inserted into the Hub.
The SD slot is spring-loaded. Push in until the card clicks into place. Do not force it.
Connect in the following order:
- USB from Hub to 3D printer (skip for Bambu Lab printers).
- Ethernet from Hub to router or network switch.
- Power supply.
.png)
Your hub will begin booting up.
Make more with AutoFarm3D
.png){kind=small}
.png){kind=small}
